Ifyour car has a USB or aux input, you can use that to connect your iPhone to a car stereo. Depending on your make, model and year, your car may have a USB port or 3.5mm jack plug in front or back. Sometimes this is where the lighter and ashtray are or used to be up front and can also be in back too. You can connect using your Lightning Checkthe firmware version of your car stereo and update it as necessary. Downloads are posted on your model support page. If your car stereo has two USB ports, make sure to use the port that matches your USB drive's file specifications; Ensure your device is set to the required USB mode before connecting it to the car stereo. Afterthe initial pairing process, from your Garmin DriveSmart device, select Volume > Bluetooth Audio Setup, and verify Vehicle is selected for each audio type you want to send to your stereo using a Bluetooth connection. Audio types set to Garmin Device play from the Garmin DriveSmart device speaker. Set the audio source for your vehicle Todo this, follow these steps: Access your mobile settings. Enter the connections section. Click on Bluetooth . Search the list of devices for your vehicle. Delete or unpair this device. Search nearby devices and pair your car again. Theremote has four wires to connect - Ground, ACC, Key1 nd Key2. I assume that the Key1 and Key2 and possibly ground, would be wired to a 3.5mm jack and plugged into the back of the stereo where it says "remote". My current stereo is a JVC KD-X370BTS and it has a single Blue/Yellow wire for steering wheel remote and a Blue/White wire for OjIb.

how to connect mobile to car audio